How to: 986 Litronic Retrofit - Dynamic Headlight Beam Adjustment

[KevinH1990]

One of your moderators - Duffy - was my guide in working out the retrofit process for installing the dynamic leveling system for litronic headlights on the 986 model Boxster. Here is a link to our posts on the Renntech Forum: http://www.renntech.org/forums/topic/44528-litronic-retrofit-question/

Because we were communicating on the 996 forum, someone interested in performing this upgrade on a Boxster may miss the posts when searching. I have attached a document showing the process I followed.

Here's a link to a YouTube video http://youtu.be/YGkfebCCf2Y showing the operation of the system after installation.

In sequence I do the following:

1. Turn on the lights with the ignition switch on - the lights go through their self-leveling routine

2. Switch on the high beams and the Xenon low beams swivel up

3. Switch off the high beams

4. Slightly raise the front of the car using a jack

Thanks again to Duffy for his help with this.

Litronic Retrofit with Automatic Dynamic Headlight Beam Adjustment - Minimum.pdf