Jump to content

TonyM

Members
  • Posts

    3
  • Joined

  • Last visited

Previous Fields

  • My Ride
    2002 Boxster S

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi guys, I have installed: 1. heated seats; 2. auto dim mirror from an audi; 3. ODC wiring; 4. Cruise control wiring. The mirror (connected to Bridge Point via Fuse B5) and the heated seats (connected Bridge point and Fuse A6) these work perfectly. Also installed the wiring for the OBC and Cruise Control modification and the wiring connectivity has been triple checked (not been able to get the coding done yet). After reassembly, I have a problem with my instrument cluster: 1. no main beam warning light (main beam operates) and there is 12V on the blue socket at the cluster; 2. no left or right indicator warning light (indicators and hazards work) although 12V is on the blue socket at the cluster; 3. washer low fluid warning light lit (washer bottle has been filled); 4. oil level indication light flashes, no level displayed (oil level is correct); 5. Low fuel warning light is lit and no fuel level is indicated (there is 40+ litres in the tank). Any thoughts or ideas?
  2. Querstions on the Bridge Points and the Bridge Point Contacts have been resolved. Thanks
  3. Looking at doing the OBC, Cruise Control, Heated Seats and also auto dimming reav view mirror. Reading through some of the mod information there are some connections made at the Bridge Points and some at the fuse (splicing into the fuse line). As an example, the wiring diagram (diagram 12) (2001 from Bentley) showing the cruise control switch A2 going to BS 14/2 A7. The mod information states to join wire from A2 to to fuse B7 wire. Are the Bridge Points wired as per the diagram (therefore connecting to BS 14/2 A7 should therefore have the same effect as connecting to the B7 fuse wire)? Would Contact Bush 99965032022 or 99965032122 be suitable to connect wires to BS 14/2 A7 (for cruise Mod) and BS 16/2 A8 (for Auto dimming interior mirror Mod)? Where is Splice Connection VS 21 (diagram 1A location D 14) physically in the car? Can anyone point me toward or supply wiring diagrams for 2002 - 986 Boxster S wiring diagrams? Thanks
  4. David

    I have a 2002 Boxster S and am researching the OBC and the Cruise Control retrofits. I see you did these modifications some time ago. I am a little confused regarding the wiring into the DME. Is it the case that the 5wires to the DME are not required except on a 2000 MY vehicle. 

    Any assistance would be gratefully received.

    Tony

    1. mavis.d

      mavis.d

      Hi Tony

      It was along time ago but I really enjoyed doing it. My car was a 986.1 so I had to run the wires to the DME although I seem to remember only connecting 4 of them. I had read somewhere that if you connected, gery I think, it would fry the DME 🤪. so I thought try it first with 4 and see if it works which it did. I've just looked at Revoultion's web site and it's cheaper for the later models so that leads me to think it's the 986.2 that don't require the wires to the DME. What model is yours?

      Good luck

      David

    2. TonyM

      TonyM

      Mine is a 986.1.

      I have been back through all the posts including yours and I apologise as I had misread the remarks regarding the connections.

      It appears that 4 wires are required to the DME from the Cruise control Switch, as indicated in your write up, what is not required is the connection from DME pin 18 to the Cruise light in the instrument cluster.

      I hope to do the install as soon as the 4 stalk arrives.

      Apolgies once again.

      Tony

×
×
  • Create New...