Def1 Posted April 27, 2020 Report Share Posted April 27, 2020 I am about to do my first oil change what size oil removal tool do I need ? 2007 987 and 2.7ltr thanks in advance Link to comment Share on other sites More sharing options...
richardjjs Posted April 27, 2020 Report Share Posted April 27, 2020 Most important is how you do the oil change Make sure you leave the Sump Plug of for at least half an hour to drain properly Once you have done this Fill the filter with Oil (5W 40) and replace. Replace and tighten the Sump Plug Drop the car and fill with 85% of the required Oil. Leave about 20 minutes before checking the level If its over 1/2 on the dip stick OR ReadOut start the engine and turn off Leave another 20 minutes and slowly top it up DO NOT OVERFILL as this can cause seals to blow Ater Boxsters need the engine running to check the level THESE ARE DIFFERENT Link to comment Share on other sites More sharing options...
Def1 Posted April 27, 2020 Author Report Share Posted April 27, 2020 Thanks for the tips much appreciated 👍 Link to comment Share on other sites More sharing options...
golfprorich Posted April 28, 2020 Report Share Posted April 28, 2020 This is what you need. Obviously don't have to buy it from Halford but the dimensions are there.. https://www.halfords.com/tools/hand-tools/automotive-tools/laser-oil-filter-cup-wrench-76mm-696674.html Link to comment Share on other sites More sharing options...
richardjjs Posted April 28, 2020 Report Share Posted April 28, 2020 Thats the one You might not need it but Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.