Spinjim Posted July 7, 2021 Report Share Posted July 7, 2021 After having a bump in June in which both headlights were replaced I noticed the pattern is very low on the road. Is the adjuster like the 987 ? Standard lights Thanks in advance Jim Quote Link to comment Share on other sites More sharing options...
Ringer250 Posted July 7, 2021 Report Share Posted July 7, 2021 This is for my 2014 981 You will need a 5mm hex tool - quite long - and the adjustment points are as per the diagram. Pull off the plastic cover indicated for access. Same on the other side. Quote Link to comment Share on other sites More sharing options...
daz05 Posted July 7, 2021 Report Share Posted July 7, 2021 Before you adjust these make sure the level sensors on the suspension aren't seized. Quote Link to comment Share on other sites More sharing options...
Greenman Posted July 7, 2021 Report Share Posted July 7, 2021 33 minutes ago, daz05 said: Before you adjust these make sure the level sensors on the suspension aren't seized. Does it actually use these to adjust the level if you have standard Xenon (as standard fit on the S) or are they just used as such with PDLS? I’ve never seen mine wiggle on startup or the like which seems to be a self adjusting trait. Quote Link to comment Share on other sites More sharing options...
daz05 Posted July 7, 2021 Report Share Posted July 7, 2021 @Greenman if you have xenon lights the system will rely on these to keep the lights level when the suspension is loaded. You can change the starting point if they were not set up correctly when installed. PDLS is the same but without xenons there is no automatic leveling system. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.