capeboy
-
Posts
204 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Posts posted by capeboy
-
-
Bought silver ones from Spyder Performance....
-
Needed to replace my corroded wheel bolts. Contacted OPC, Tonbridge.....apparently they make them in black ONLY now?!!! (Due to the corrosion issues). That's not right, surely? Black bolts on silver wheels????
-
Does anyone know where to get the roof push rod end caps in the UK?
-
Selling my 987 Meteor Grey hardtop as no longer needed. . No scratches, rust etc.
£1200, collected from WD3 area.
-
Thanks. Have done that with old towels but the foam under the carpet still feels damp...and in this freezing weather, the dehumidifier seems to be less effective than normal...are there instructions for removing the floor carpet????
-
Update. Despite several days of drying out the old board, it wouldn't work on re-installation. So bought a new (pre-programmed) one from MBD. Excellent service from them.
All seems fine now (spoiler and rear brake lights). Haven't tested the soft top as the hard top is currently in place....a mate cleared the error messages.
Still struggling to dry the foam under the passenger carpets though....de-humidifier in place for a few days now....ANY IDEAS please?
And have re-checked all the drain holes again......fingers crossed!
-
On 1/14/2023 at 11:45 AM, Menoporsche said:
So MBD want £375, or someone else wants £?200 (I can't quickly see the OPC price) plus coding fee, for which a few members here may ask a very reasonable price . There are also used ones from Steve Strange but who knows if they also had water damage.
£200? where's that, @Menoporsche?
-
2 hours ago, capeboy said:
Despite clearing all the drain holes a few weeks ago, the rear spoiler started playing up, then the rear brake light etc etc....on inspection, the passenger footwell and under the passenger seat were waterlogged. ECU module completely soaked in water...
I have removed the seat and am busy drying the carpets.
ECU part number 977.618.260.08
Is it worth drying the ECU and then trying to plug it in again? Or is a new one the only option? If so, has anyone used this service?:
Any other advice gratefully received...
Thanks.
Anyone aware of this company....MDBDIAGNOSTICS? They claim to send out a fully coded ECU...
-
Despite clearing all the drain holes a few weeks ago, the rear spoiler started playing up, then the rear brake light etc etc....on inspection, the passenger footwell and under the passenger seat were waterlogged. ECU module completely soaked in water...
I have removed the seat and am busy drying the carpets.
ECU part number 977.618.260.08
Is it worth drying the ECU and then trying to plug it in again? Or is a new one the only option? If so, has anyone used this service?:
Any other advice gratefully received...
Thanks.
-
23 hours ago, JonSta said:
Why would you need such a thing if you don't mind me asking?
Indie managed to break off a bit whilst trying to remove a seized coffin arm bolt...!!!!
- 1
-
Can't seem to find a used one anywhere in the UK!!!
-
14 minutes ago, Bike Loon said:
Tried Douglas Valley Breakers?
Yep, none.
-
2008n Boxster S, 987.1.
Best place to buy a used front subframe please? None in the obvious places....
Part number, I believe: 99734108106
Thanks
-
5 minutes ago, JonSta said:
Step this way my boy and hand over £900.....
I really need to do my passenger side one. I always close the roof to the last 6" and get out and check. Not while the car is moving... Sometimes it's fine someimes it snags over.
£900 for replacing the hood?
-
Have seen the videos about replacing the elastic...question though: What is the official OPC fix for this problem?
-
Need to replace all 4 arms and bushes.....recommendations please. TIA
REAR BOOT LIGHT AND SOFT TOP NOT WORKING - RELATED?
in 987
Posted
My rear boot light isn't working, despite replacing the bulb. Can't see any fuse for it either.
Also noticed the soft top (intermittently) doesn't open (windows don't drop on release)...are these issues linked??? Any ideas what's causing them?
Recommendations for changing all the interior bulbs to LED...link to supplier?
TIA