mckennas

not me but Cath Burrows Porsche put later model roof gearboxes, new arms etc and new drainage cups on 

i didnt do it but had 2 new porsche door locks fitted and a central locking control unit and all programing to have a fully working central locking system

if i had seen them i may have been tempted lol

also some kind soul decided to scratch my not long painted bumper !!! 

so i have also polished them out

polished the headlights to get rid of the yellowing that had started and put in new bulbs, sorry didnt take a before

i got them from ebay, says that they are OEM units and they do work well

http://www.ebay.co.uk/itm/302058718697?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

this is the link i think it will work and they were £17.14 each

Changed the rams on the bonnet, it now pops up further when i pull the lever and stays up better once opened, the old ones worked but this is just me being too much of a pain in the ar*e to myself lol

not a " did " but the result of tghe cleaning and waxing, looks like it wxas actually worth it lol

i did mine this morning and it turned out fine, just followed the instructions and took the time it needed, no spots at all, maybe you just need another go at it ?

cleaned and resealed the hood, washed and waxed the rest of her now cup of tea and then off out to get her dirty

washed and waxed her, fixed the spoiler going down because it wasnt sitting all the way down , simple just put some chain wax on the ram and sent it up and down a few times and it just righted, greased up the bonnet catch 

On 12/03/2017 at 11:26 PM, Boxey11 said:

I would like to do this, any advice or "how to" would be brilliant 

Sorry I never took any pictures when I did it, but it was easy, got the unit from eBay came with a fused link attached, earthed it against the radio body and used a spare ignition live feed I found when I was fixing my radio, the hardest but was getting it to fit in the hole, I would imagine you can get smaller versions but I used a dremmel to cut away the moulders tube on the fascia at the rear and then to make the hole a touch bigger possible 1mm in dia, once in  I could not get the securing ring on so I bonded it in using some plastex waited for it to dry and then put it all back together 

i fitted a double usb socket

i fixed the radio so it switches off now when i take out the key, was really simple but daunting when you are useless like me

replaced this, another relatively cheap repair ignored by the previous owner

finished up with this

changed the handbrake switch while i was in there 

gave the inside and the console a good clean while it was in apart, 

repair and re dye the seats next

took it to the garage for its new clutch, lower front wishbones, drop links, passenger door lock and small welding under passenger cill.

it will also have its small oil leak investigated and possibly get reversing sensors