-
Posts
75 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Posts posted by andrewwalling
-
-
Thanks for the offer
I started stripping the rears on Saturday same problem with the pinch bolts welded in and also having problems with the camber caster bolts as they appear to be stuck in the bushes trying not to damage the coffin arm bushes
Only what to expect on a 17 year old car with the original suspension and nuts and bolts plus steel and aluminium....not a great match
I am off to Dubai with work so once I get back I may get intouch for the loan of the induction heater
Sachs top mounts were order with new sway bar bushes and new drop links..... the list is growing, But it should be good at the end and it will all go back together a lot easier....I hope
-
Front drop links and the drop link pinch bolts were sized in, cut the drop link so I could get a socket on then it was a slow plod to get it out still
Top mounts and dome washers were all sized as well
Still in progress looking at the rears this weekend
Shopping list is growing
-
Thanks Guys for the update
I will keep you posted on the progress
Big list
Brake disk and pads all round
bleed brakes and new brake fluid
Shocks Springs and bump stops and dust covers all round see how the top mounts are when I take them apart
😀😉
-
Koni's arrived this morning
Just another quick question once you had fitted yours did you go anywhere special to get the suspension set up once they were fitted
Do you recommend anyone locally
Andrew
-
Decision made I have ordered the Koni Special Active 😀
So a Good winter project to come
Thanks for all your advice 1/2cwt
Andrew
-
1/2cwt This has been such a great help sorry I had got mixed up with the sport. I think the special active is more what I am looking for and to be honest I am not looking to lower the car too much either.
Can I ask just one more question Std Springs do you have any suggestions and what are the lengths of the std springs
But is I did lower again any suggestions on springs
Andrew
-
I was also looking at the Koni Sport kit 11407791
https://www.dcperformance.co.uk/cheap/1346356/porsche/koni-sport-suspension-kits/1140-7791.html
I dont think the special Active comes as a kit?
-
Guys
this is great help thanks very much for the advice, I think this is going to be a winter project and you have set me down the Koni Ruote
I will need to change Top mounts and Bump stops as well and I will look at the anti Roll bar bushes next time I am under the car
One question on the Rear as far as I can see these need to be pre set and once they are fitted then you can adjust them is that correct and if so any suggetion on what to set them too?
-
Thanks for the Feedback I will check out the Koni option
They look a good option
Anti Roll bars and bushes again is another part of the project
-
good road handling sporty fast around corners but still a reasonable good comfy ride
Not really looking to put this one on the track
-
I am considering a suspension upgrade on my 986 Boxster 2.7 Tiptronic
Considering a Bilstein upgrade or a set of coil overs
Does any one have any experience with the BC Coilovers
-
Oil and filter change
Air filter and Cabin filter
Tiptonic Oil & Filter change
🤓
-
What an amazing Tread, well done to you for this it has been a great help
986 Lower Track Control Arms and Bushes
in 986
Posted
I can confirm the eccentric bolts are a nightmare and were welding in, heat did not get them out I had to cut them out
Be careful just twisting them that you don't damage the subframe and crack the casing where the eccentric bolts sit on......😟
best price at present for the coffin arms is design 911
https://www.design911shop.com/Control-Arm-with-Lower-Ball-Joint-Porsche-986-Boxster-and-996---04_2/prod13523/
Andrew