1666matt Posted April 3, 2018 Report Share Posted April 3, 2018 Hello all So today I started to change my lower wishbones and drop link's, front went on easy peasy, but the rear OH MY GOD!! Drop link is off ready all the wishbone bolts are off, ball joint has been separated BUT the camber bolt will not budge! The nuts off and free, I've tried putting the nut back on and hitting it (with limited room) but nothing. Please any ideas? In my thinking stage I did re clear the calipers though ? Link to comment Share on other sites More sharing options...
Nobbie Posted April 3, 2018 Report Share Posted April 3, 2018 These are known to seize and often need to be replaced. You may need to buy a new one and cut the old one off. I think they're about £15 from OPC, but could be wrong. You could try heat from a blowtorch followed by penetrating fluid overnight and then hit it a bit more. Link to comment Share on other sites More sharing options...
golfprorich Posted April 3, 2018 Report Share Posted April 3, 2018 A reciprocating saw will be your new best friend very soon Link to comment Share on other sites More sharing options...
myfirstboxster Posted April 3, 2018 Report Share Posted April 3, 2018 33 minutes ago, golfprorich said: A reciprocating saw will be your new best friend very soon Yes indeed it will be , I found it to be the only way to get the arm off , followed by a trip to the OPC Link to comment Share on other sites More sharing options...
1666matt Posted April 3, 2018 Author Report Share Posted April 3, 2018 I have a saw but can't figure out how to get it in there ?♂️ Link to comment Share on other sites More sharing options...
1666matt Posted April 3, 2018 Author Report Share Posted April 3, 2018 Didn't mean the constant underscore Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.