grantcos Posted May 23, 2018 Report Share Posted May 23, 2018 I am desperately trying to get a rear anti roll bar but what a hastle. I have been through this and every porsche site but I can not find a conclusive part number. Porsche Edinburgh have been great today, but still nothing conclusive and Germany are now dealing with it as there are four options and nothing has come back as the right one for me. I have had the vernier calipers on it and its 19.3 mm on the smoothest partwith no corrosion, presumably the quoted 19.2mm is prior to powder coat. So I have narrowed it to this, from the option of 18.7 mm, 19.2mm or 19.8mm But alas no part number to actually make sure I am buying the correct one be it second hand or new. My decal is missing to gain the part number. My chassis number is WPOZZZ98Z4U641007 3.2 S manual 2003 Link to comment Share on other sites More sharing options...
nick_johnson Posted May 23, 2018 Report Share Posted May 23, 2018 It is going to be one of these six: https://www.design911.co.uk/pages/diagramsBrowser.aspx?categoryID=5&diagramID=3247 Personally though I would upgraded to the Eibach’s then you can get both font and rear for a little more money and more importantly a better handling car. Link to comment Share on other sites More sharing options...
grantcos Posted May 24, 2018 Author Report Share Posted May 24, 2018 Thank you Nick, I have an other thread and it has been answered on there for the part number so luckily that's it narrowed down. It's a good shout in regards to uprating for a round the same cost. Thank you for your time. Grant Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.