Cooks Posted August 6, 2018 Report Share Posted August 6, 2018 Hi all, cleaned the throttle body tonight and when the roof is closing as the metal bit goes flat to the car it thuds. Didn't do it before and I've been in the engine cover and put it back together before with no noise following . Cannot seem to see anything in the way either. Any ideas? Thanks. Link to comment Share on other sites More sharing options...
the baron Posted August 7, 2018 Report Share Posted August 7, 2018 Check the position/alignment of the roof cover when closing, the last few seconds, see if it is catching on the small body coulored pice of bodywork at bottom of window, not sure how to describe it, it alignes with the roof cover in both closed and open positions. Link to comment Share on other sites More sharing options...
Grizzlee Posted August 12, 2018 Report Share Posted August 12, 2018 The clamshell is likely catching on something then slamming shut Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.