lofi Posted April 10, 2021 Report Share Posted April 10, 2021 I will shortly be removing the existing standard exhaust and putting another standard (though modified) exhaust back on. I am expecting all nuts and bolts to be rust blobs. Plus probably the brackets etc, so what new parts do I need to have to hand for fitting? Link to comment Share on other sites More sharing options...
daz05 Posted April 10, 2021 Report Share Posted April 10, 2021 Off the top of my head you're going to need 2 gaskets, 4 X nuts and bolts, 8mm if I remember. Oh and a grinding tool and some patience! Link to comment Share on other sites More sharing options...
lofi Posted April 11, 2021 Author Report Share Posted April 11, 2021 Luckily I replaced the flange bolts and gaskets less than a year ago. I’ll have a check on the other fixings Link to comment Share on other sites More sharing options...
lofi Posted April 11, 2021 Author Report Share Posted April 11, 2021 Looking at the PET is seems less than I thought. Hopefully the flanges are ok, then appears there is a clamp each side that secures the exhaust to the exhaust cradle. What I'm not clear on is the sleeve clamps between the two sides of the exhaust. Link to comment Share on other sites More sharing options...
daz05 Posted April 11, 2021 Report Share Posted April 11, 2021 Have to get under the car and have a look. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.