Livingthedream Posted July 6, 2017 Report Share Posted July 6, 2017 Hi, Had a look through the topics and can't see any thread, i noticed that both the centre vents don't respond when moving the control knob, up/down or left/right I'm hoping they just clip on to the fins inbehind can anyone tell/show me how to release them from the dash board. thanks neil ps I've been trying to add photos but the file size is apparently to large.. Link to comment Share on other sites More sharing options...
Lonewolfgjp Posted July 6, 2017 Report Share Posted July 6, 2017 As far as I know you have to brake the vents to remove them with out removing the dash. I ve read a how to before and it's not as scary as it sounds, the new vents simply snap back in. But I would definitely check they are broken before you resort to swapping them ? Link to comment Share on other sites More sharing options...
Sheppie_hill Posted July 7, 2017 Report Share Posted July 7, 2017 I used tweezers to snap my fins back onto the adjuster. Worked for all four vents. Link to comment Share on other sites More sharing options...
911-32 Posted November 15, 2017 Report Share Posted November 15, 2017 You are not alone - one of mine is like this. Frustrating as it doesn't direct the heat properly. I haven't got round to thinking about fixing it, but will watch your progress with interest. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.