Kermitdeer Posted June 23, 2018 Report Share Posted June 23, 2018 Hi, I have a 2004 986 S and I have an issue with the CD Autochanger not working. I have ejected the cd holder in the bonnet, to see if anything was jammed but after re inserting the holder the cd still wont work. Has anyone had issues with there’s??? Link to comment Share on other sites More sharing options...
S8ked Posted June 23, 2018 Report Share Posted June 23, 2018 I had a similar issue with my wife's Audi. It turned out I was putting the CD's in upside down. Link to comment Share on other sites More sharing options...
Kermitdeer Posted June 24, 2018 Author Report Share Posted June 24, 2018 Hi, I don’t think this is the fault it shows on the screen as a system error and I have to press the button to confirm.?? Link to comment Share on other sites More sharing options...
Richard Hamilton Posted June 24, 2018 Report Share Posted June 24, 2018 What does the error message say? It might be that the PCM has forgotten it's coding setting. I've seen it a couple of times when the phone or CDC stopped working for no apparent reason. Link to comment Share on other sites More sharing options...
Kermitdeer Posted June 25, 2018 Author Report Share Posted June 25, 2018 Hi, the radio and sat nav works ok but when I first turn on the ignition this message come up system error and I have to press the right hand knob to confirm and the messsage is cleared.and at the bottom of the radio display I get single cd showing? Link to comment Share on other sites More sharing options...
Kermitdeer Posted July 12, 2018 Author Report Share Posted July 12, 2018 On 6/24/2018 at 10:22 PM, Richard Hamilton said: What does the error message say? It might be that the PCM has forgotten it's coding setting. I've seen it a couple of times when the phone or CDC stopped working for no apparent reason. Hi, still have issues with cd auto hanger I think the battery has gone flat and this may have as you said PCM lost its coding. Where would I find this code please? Link to comment Share on other sites More sharing options...
Richard Hamilton Posted July 12, 2018 Report Share Posted July 12, 2018 The system has to be coded with a Porsche tester. Does it just say "system error" and nothing else? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.