Jump to content

Fuel Cap Lock


GraemeC

Recommended Posts

Hi guys,

Just bought my first Boxster (987.1 S) and all appears well at the mo. One thing that doesn't work is the fuel cap. It doesn't lock when the car is locked. I can't see too much on the usual tutorial channels about fixing it so thought I'd ask here. The locking arm does go in and out when the car is locked/unlocked but doesn't appear to go into the cap when extended. Any ideas?

Link to comment
Share on other sites

I had/have the same issue. If you look at the plastic pin that is meant to engage in the cover flap, mine had a small metal washer towards the left, that impeded the pin from coming forward fully. It’s apparently the emergency release cable (open the drivers door fully and you’ll see the end of the cable at the top of the  door shut area, at the front). I sprayed mine with WD40, then tried PTFE spray, Duckoil, etc and eventually the washer was sufficiently lubricated that the pin moves freely and mine now locks. You can help the process by gently pulling the pin forwards with your finger. Do this a few times, spray lube in there, and hopefully it will start working.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...