Jump to content

Retrofitting Cruise Control - Stalk Already Installed


bpj

Recommended Posts

Has anybody retro-fitted cruise control to a 2003-4 car? The car comes with the on-board computer, and I already have the cruise control stalk installed.

Many of the guides online no longer have pictures attached. Is it a fairly simple job? Cheers! :thumbsup_still:

Link to comment
Share on other sites

I've had a read of those, thanks. It looks as simple as connecting the following up on 03-04 cars:

Plug C (Grey) on the Instrument Cluster Pin 17 - Stalk Connector Pin 1
Plug C (Grey) on the Instrument Cluster Pin 4 - Stalk Connector Pin 3
Plug C (Grey) on the Instrument Cluster Pin 1 - Stalk Connector Pin 4
Fuse B7 - Stalk Connector Pin 2

Forgive my ignorance, but where do I find the instrument cluster and stalk connector pins?

Link to comment
Share on other sites

Hi ho.  Looks like you cut 'n pasted my post on Renntech.

The instrument cluster plugs are marked with tiny numbers at each end of the plug.  Use VW repair wires, which have terminals fitted to each end, and insert them in the appropriate hole in the plug.  I have a DIY for the complete job.  If you PM me with your email address, I'll send it to you when I get to my PC tomorrow.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...