m8ttb Posted March 13, 2019 Report Share Posted March 13, 2019 The offside stone guard isn't too bad but the nearside one is quite discoloured, tried polishing etc, but thinking of getting this https://www.porscheshop.co.uk/porsche-body-trim-parts/porsche-boxster-987-gen-1-body-trim-parts-2005-to-2009/porsche-boxster-987-gen-1-badges-decals-2005-to-2009/stone-guard-left-hand-side-clear-2005-2012.html Is there any advice on how to fit these? Link to comment Share on other sites More sharing options...
Christopher2110 Posted March 13, 2019 Report Share Posted March 13, 2019 No experience with this particular one but just make sure the area is clean and you have no wax or other coating applied to your paint first 👍🏼 Would probably do both sides at the same time, can imagine putting a new one on is going to make the other side look discoloured Link to comment Share on other sites More sharing options...
red rocket Posted March 13, 2019 Report Share Posted March 13, 2019 There are much cheaper ones on eBay that people have used successfully. Suggest you do a forum search for details and how to apply. Link to comment Share on other sites More sharing options...
rowbos Posted March 13, 2019 Report Share Posted March 13, 2019 I bought OE stone guards for my last Boxster as they had become yellowed. Rather than feck it up myself I popped into my local vehicle wrapping specialists and they removed the old ones and applied the new in super quick time. Not a bad service for £10 (all they would accept) 😬 Link to comment Share on other sites More sharing options...
Truth Posted March 13, 2019 Report Share Posted March 13, 2019 Tenner well spent ! 👍 Link to comment Share on other sites More sharing options...
rowbos Posted March 13, 2019 Report Share Posted March 13, 2019 2 minutes ago, Truth said: Tenner well spent ! 👍 Knowing my plastic shield installation skills ... yes definitely 😂 Link to comment Share on other sites More sharing options...
detail1 Posted March 14, 2019 Report Share Posted March 14, 2019 Knowing what the Porsche supplied ones are like (thick leather like film). I'd pop in to see a paint protection film specialist and ask him to cut and fit some better film. I did mine myself with some quality film supplied by my PPF installer, film is a lot thinner and clearer but equally as strong. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.