Pothole Posted April 30, 2019 Report Share Posted April 30, 2019 One of my key remotes has stopped working. The little red light on the key still flashes as normal when you press the buttons and I replaced the battery in case that was the issue, but to no avail. The other key remote still works fine, unlocking the doors and both boots, so I assume the car part of the equation is fine. Any thoughts? Link to comment Share on other sites More sharing options...
Paul P Posted April 30, 2019 Report Share Posted April 30, 2019 Various talk about resyncing two suggestions keep coming up. 1). Reverse the battery in the key for a few seconds. Apparently “reboots” the key 2) turn in the ignition with the key in question. Don’t start the car. Press the open/close button on the key for 10 seconds. Not had to do either myself. But have read them as suggestions a few times. Hope that helps. Link to comment Share on other sites More sharing options...
Pothole Posted April 30, 2019 Author Report Share Posted April 30, 2019 OK, thanks. Will give those a go. Link to comment Share on other sites More sharing options...
red rocket Posted April 30, 2019 Report Share Posted April 30, 2019 4 hours ago, Pothole said: OK, thanks. Will give those a go. Let us now how you get on. Could be useful to know for the future. Link to comment Share on other sites More sharing options...
Pothole Posted April 30, 2019 Author Report Share Posted April 30, 2019 So, I used the key that wasn't working properly to lock the car manually using the physical lock in the driver's door. Then unlocked it manually. Then stuck it in the ignition and pressed the lock button for 10 seconds. Bingo. The remote is now fully functional again. Thanks all. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.